News & View, Volume 46 | Cross-Weld Creep-Rupture Testing for Seam Weld Life Management

News & Views, Volume 46 | Cross-Weld Creep-Rupture Testing for Seam Weld Life Management

By:  Jonnathan Warwick, Terry Totemeier, and Brian Chambers, Duke Energy

News & View, Volume 46 | Cross-Weld Creep-Rupture Testing for Seam Weld Life ManagementLongitudinal seam-welded hot-reheat steam piping operating in the creep regime is a continuing life-management challenge for many older fossil-fired power plants.  In response to catastrophic seam-welded piping failures in the 1980’s, the Electric Power Research Institute (EPRI) developed a comprehensive inspection protocol to insure continued safe operation of these piping systems [1]. The protocol requires full inspection of seam-welded hot-reheat pipe once a threshold of service exposure (calculated creep life consumption) has been reached, and re-inspection at intervals after the initial inspection depending on the inspection results.  Inspection for sub-surface cracking using ultrasonic testing (conventional or advanced) is strongly recommended, in combination with checking for surface cracking using wet fluorescent magnetic particle testing (WFMT).  Initial inspection and re-inspection of these piping systems represents a large maintenance cost for utilities, especially as older plants remain in service due to the changing economics of power generation.

READ MORE